RG-S2910-24GT4XS-UP-H(V3.0)
24-Port Gigabit L2+ Managed POE Switch with SFP+
Feature Highlights:
The RG-S2910-H series switch, launched by Ruijie Networks, embodies the design of security, high efficiency, and energy saving. It offers full gigabit access and flexible, scalable 10GE uplink data exchange capabilities, making it a next-generation gigabit Ethernet switch. With a new hardware architecture and Ruijie RGOS11.X modular operating system, the switch provides more resource entries, faster hardware processing performance, and better operation experience. The PoE models with different configurations can satisfy access needs of all the downlink ports of the system for PoE load and high bandwidth demand of 10GE uplink.
Feature highlights of RG-S2910-H PoE Switch Series:
● Up to 60 Watts per Port by High-power PoE Technology
● 4 NeverDie High Reliability Technology: NFPP, XCor, VSU, XSurge
● Upto 67+ Year MTBF (Mean Time Between Failure)
● Lifetime Free Cloud Management
● Built-in Layer 3 Routing Support
● Power Redundancy Support
Related products
RG-S6510-48VS8CQ
Feature Highlights:
RG-S6520-64CQ
Feature Highlights:
RG-S6930-2C
Highlight Features
- 100GE and 200GE line cards, and up to 144 x 100GE or 72 x 200GE ports
- Hardware-level redundancy, ensuring nonstop services and data center network stability
- MACsec data encryption and transmission, effectively protecting service data security
- Telemetry-based network monitoring and automated O&M, making management simple and efficient
- Straight front-to-rear airflow design, enhancing the cooling efficiency
RG-SF2920-8GT2MG2XS
Highlight Features
- Various port combinations, rate increase, surge protection greater than 8 kV, 8 × 10/100/1000Mbps copper ports with auto-negotiation, 2 × Gigabit/2.5G copper ports, and 2 × 10G uplink fiber ports
- Small size, flexible and fast installation, efficient heat dissipation, and low noise
- New 5G Ethernet port, meeting the requirements of new services and enhancing service scalability
- Reliability enhancement, metal enclosure, metal Ethernet ports, independent optical transceiver design, and more stable data forwarding
- Easy and effective network-wide management, ensuring high security and reliability for networks
RG-DEMUX(C)-24LC/LC+RG-MUX(C)-24LC/LC
Highlight Features
- The 8-port 16-wavelength combiner innovatively adopts the colored optical technology and is used in combination with core or access switches equipped with pluggable colored optical transceivers.
- The dual-slot design provides 24 ports for device access per slot and a maximum of 48 ports for device access at full load. The device uses six WDM optical fibers for output.
- The passive network design supports direct replacement of distribution switches without requirement for O&M of ELV rooms.
- Exclusive Gigabit/10G fiber to the room is supported and the bandwidth can be upgraded easily. Transparent distribution devices can be retained during the upgrade.
- Multiple installation modes are available for selection.
RG-DEMUX(C)-24LC/LC
Highlight Features
- The expansion module of the 24-port core combiner uses three WDM fibers for transmission, which effectively reduces trunk optical fibers required in buildings.
- The unique colored optical technology is used to provide exclusive Gigabit/10G bandwidth for indoor use, which meets network requirements.
- The all-optical network involves only passive devices, exempting ELV rooms from O&M management and making distribution nodes passive completely.
- The modular expansion module is easy to fix and install.
RG-N18006-X
Highlight Features
- Midplane-free design and Clos orthogonal architecture, ensuring non-blocking data forwarding
- 6-slot chassis, various ports, and 24 GB large cache on a single card, better handling data center surge traffic
- Midplane-free design, direct airflow, and cold and hot airflow isolation, greatly improving heat dissipation efficiency
- Counter-rotating fan design, improving heat dissipation efficiency; titanium-level power supply, delivering up to 96% power conversion efficiency
RG-SF2920U-4GT1MS-P
Highlight Features
- Various port combinations, surge protection greater than 8 kV, PoE+, 4 × 10/100/1000Mbps copper ports with auto-negotiation, and 1 × 2.5G uplink fiber port
- Small size, flexible and fast installation, efficient heat dissipation, and low noise
- 2.5G uplink fiber port for a higher switching rate
- Reliability enhancement, independent optical transceiver design, and more stable data forwarding
- Integrated deployment, achieving physical isolation of internal and external networks more easily
- Easy and effective network-wide management, ensuring high security and reliability for networks
Reviews
There are no reviews yet.