PoE Accessory

RG-POE-AT30

Compact Gigabit PoE+ injector delivering 52V / 31.2W to power PoE access points

✓ Genuine Ruijie / Reyee product — supplied by Spollex
At a Glance
Output
52V DC / 0.6A
Max Power
31.2 W
Port
1× Gigabit
Input
100–240V AC
Weight
145 g
Surge Protection
2000A max
Supplied by Spollex Distribution — subject to availability and shipping feasibility
🚚 Export & supply support
🛠️ Pre-sales technical guidance
📄 Genuine Ruijie hardware

The RG-POE-AT30 is a single-port Gigabit PoE injector that adds Power-over-Ethernet capability to a network link where the upstream switch doesn't already provide PoE — a common accessory alongside non-PoE switches when deploying Reyee access points.

What It's Designed For

Deployments where the existing switch doesn't supply PoE, but a Reyee access point or PoE-powered device still needs one — avoiding a switch replacement just to add PoE to a single port.

Key Features

✓

Adds PoE+ power to a single Ethernet run without replacing the upstream switch

✓

31.2W maximum output supports most Reyee access points and PoE devices

✓

Gigabit-rated port avoids limiting link speed to Fast Ethernet

✓

Compact, lightweight design (145g) for easy installation in tight spaces

✓

High surge-current protection (up to 2000A) for improved reliability

Benefits for Businesses & System Integrators

  • Avoids the cost of replacing a working non-PoE switch for one or two devices
  • Gigabit-rated so it doesn't cap link speed
  • Compact enough to install discreetly near the powered device
  • Genuine Ruijie accessory sourced through Spollex

Full Specifications

Ethernet Port1 × 1000BASE-T Gigabit, passive PoE+ output
Output Voltage / Current52V DC, 0.6A
Max Output Power31.2 W
Input Voltage100–240V AC, 50/60Hz
Max Input Current0.7 A
Inrush Current100 A @230V AC
Operating Temperature–10°C to +45°C
Storage Temperature–40°C to +70°C
Dimensions95.2 × 52.2 × 33.2 mm
Weight145 ± 5 g
Surge ProtectionUp to 2000A maximum discharge current
Download Full Official Datasheet (PDF) →

Deployment Environments

The RG-POE-AT30 is typically paired with a single access point or PoE camera on a network that otherwise runs a non-PoE switch — a lower-cost alternative to swapping out the switch to gain PoE on just one or two ports.

Typical Use Cases

Powering a single Reyee AP from a non-PoE switch
Retrofitting PoE onto an existing non-PoE network
Powering standalone PoE cameras or devices
Small deployments where a full PoE switch isn't justified

Compatibility & Deployment Considerations

Output is 52V/31.2W (802.3at-class); confirm the powered device's PoE class and power draw fall within this budget before pairing it with power-hungry access points.

Frequently Asked Questions

How much power can the RG-POE-AT30 deliver?
Up to 31.2W at 52V DC, sufficient for most standard Reyee access points.
Does it support Gigabit speeds?
Yes, its single port is rated 1000BASE-T (Gigabit).
Can it power devices needing more than 31.2W?
No — check the powered device's PoE class and rated consumption against this injector's 31.2W budget before use.
What input voltage does it need?
100–240V AC at 50/60Hz, suitable for most regional mains supplies.

Availability & Quotation

The RG-POE-AT30 is available through Spollex, subject to product availability. Submit a product requirement to receive current pricing, lead time, and shipping options for your destination.

For orders outside Spollex's core Authorized Distributor markets (UAE, Oman, Nepal), we support export and supply inquiries subject to destination requirements, commercial terms, and shipping feasibility — confirmed per inquiry, not guaranteed in advance.

Related Products

Available For These Markets

Request a Quotation for RG-POE-AT30

Tell us your quantity, project type, and delivery location — we'll follow up with pricing and availability.

Request a Ruijie Product Quotation