XS-S1930J-8GT2SFP-P
Highlight Features
- Small size and personalized design, flexible deployment in small space
- No fan, natural heat dissipation, quiet and energy saving
- Various security protection policies, stable and reliable operation of equipment
- Unified management on the cloud platform, simpler and easier O&M
Related products
RG-N18006-X
Highlight Features
- Midplane-free design and Clos orthogonal architecture, ensuring non-blocking data forwarding
- 6-slot chassis, various ports, and 24 GB large cache on a single card, better handling data center surge traffic
- Midplane-free design, direct airflow, and cold and hot airflow isolation, greatly improving heat dissipation efficiency
- Counter-rotating fan design, improving heat dissipation efficiency; titanium-level power supply, delivering up to 96% power conversion efficiency
RG-SF2920U-8GT1MS
Highlight Features
- Various port combinations, rate increase, surge protection greater than 8 kV, 8 × 10/100/1000Mbps copper ports with auto-negotiation, and 1 × 2.5G uplink fiber port
- Small size, flexible and fast installation, efficient heat dissipation, and low noise
- 2.5G uplink fiber port for a higher switching rate
- Reliability enhancement, metal enclosure, metal Ethernet ports, independent optical transceiver design, and more stable data forwarding
- Integrated deployment, achieving physical isolation of internal and external networks more easily
- Easy and effective network-wide management, ensuring high security and reliability for networks
RG-DEMUX(C)-24LC/LC+RG-MUX(C)-24LC/LC
Highlight Features
- The 8-port 16-wavelength combiner innovatively adopts the colored optical technology and is used in combination with core or access switches equipped with pluggable colored optical transceivers.
- The dual-slot design provides 24 ports for device access per slot and a maximum of 48 ports for device access at full load. The device uses six WDM optical fibers for output.
- The passive network design supports direct replacement of distribution switches without requirement for O&M of ELV rooms.
- Exclusive Gigabit/10G fiber to the room is supported and the bandwidth can be upgraded easily. Transparent distribution devices can be retained during the upgrade.
- Multiple installation modes are available for selection.
RG-S6920-4C
Highlight Features
- Diverse ports, four service slots, up to 128 x 100GE QSFP28 ports or 64 x 100GE QSFP28 and 16 x 400GE QSFP-DD ports
- Hardware-level redundancy, ensuring service continuity
- Lossless Ethernet, ensuring zero packet loss during RDMA E2E communication
- Telemetry-based network monitoring and automated O&M, making management simple and efficient
- Highly-efficient heat dissipation and energy saving, with power consumption less than 1950 W and power conversion efficiency up to 94%
RG-S6980-64QC
Highlight Features
- High-density 400GE switch with 64 x 400GE QSFP-DD ports in the 4-RU space
- Hardware-level redundancy, ensuring service continuity
- 400GE QSFP-DD ports, interconnection at a distance of up to 120 km, and smooth and rapid data communication
- Lossless Ethernet, ensuring zero packet loss during RDMA E2E communication
- Telemetry-based network monitoring and automated O&M, making management simple and efficient
RG-MUX(C)-24LC/LC
Highlight Features
- The expansion module of the 24-port transparent distribution device can be used in combination with the building-side combiner. It uses three WDM fibers for transmission, which effectively reduces trunk optical fibers required in buildings.
- The unique colored optical technology is used to provide exclusive Gigabit/10G bandwidth for indoor use, which meets network requirements.
- The all-optical network involves only passive devices, exempting ELV rooms from O&M management and making distribution nodes passive completely.
- The modular expansion module is easy to fix and install.
RG-SF2920-16GT2MG2XS
Highlight Features
- Various port combinations, rate increase, surge protection greater than 8 kV, 16 × 10/100/1000Mbps copper ports with auto-negotiation, 2 × Gigabit/2.5G copper ports, and 2 × 10G uplink fiber ports
- Small size, flexible and fast installation, efficient heat dissipation, and low noise
- 2.5G Ethernet port, meeting the requirements of new services and enhancing service scalability
- Reliability enhancement, metal enclosure, metal Ethernet ports, independent optical transceiver design, and more stable data forwarding
- Easy and effective network-wide management, ensuring high security and reliability for networks
RG-DEMUX(C)-24LC/LC
Highlight Features
- The expansion module of the 24-port core combiner uses three WDM fibers for transmission, which effectively reduces trunk optical fibers required in buildings.
- The unique colored optical technology is used to provide exclusive Gigabit/10G bandwidth for indoor use, which meets network requirements.
- The all-optical network involves only passive devices, exempting ELV rooms from O&M management and making distribution nodes passive completely.
- The modular expansion module is easy to fix and install.
Reviews
There are no reviews yet.