Wall-Mounted Access Point

RG-RAP62-Wall-Lite

Wi-Fi 6 AX3000 in-wall access point that replaces a standard wall plate

✓ Genuine Ruijie / Reyee product — supplied by Spollex
At a Glance
Wi-Fi Standard
Wi-Fi 6 (802.11ax)
5GHz Rate
2401 Mbps
2.4GHz Rate
573 Mbps
Junction Box
86mm / EU standard
Depth
13.2mm inside wall
Form Factor
In-wall plate
Supplied by Spollex Distribution — subject to availability and shipping feasibility
🚚 Export & supply support
🛠️ Pre-sales technical guidance
📄 Genuine Ruijie hardware

The RG-RAP62-Wall-Lite is a dual-band Wi-Fi 6 access point built into a wall-plate form factor, fitting standard 86mm or EU junction boxes so it sits flush with the wall rather than mounting as a separate device — suited to hotel rooms and serviced apartments where a ceiling AP isn't practical or wanted.

What It's Designed For

Hotel rooms, serviced apartments, and similar spaces where Wi-Fi needs to be close to the guest without an externally visible ceiling or wall-mounted AP.

Key Features

Wi-Fi 6 (802.11ax) dual-band radio in a wall-plate form factor

Fits standard 86mm and EU junction boxes for straightforward retrofits

Up to 2401 Mbps at 5GHz and 573 Mbps at 2.4GHz

Sits nearly flush with the wall (24.8mm outside, 13.2mm inside)

Blends into finished interiors better than a visible ceiling or desk AP

Benefits for Businesses & System Integrators

  • Near-flush wall installation keeps the room's finished look intact
  • Per-room AP placement can improve consistency of in-room Wi-Fi versus a shared ceiling AP
  • Standard junction-box compatibility simplifies retrofit installs
  • Wi-Fi 6 capacity supports guests' growing number of connected devices

Full Specifications

Wireless StandardIEEE 802.11ax (Wi-Fi 6)
Frequency Bands2.4 GHz (up to 573 Mbps) and 5 GHz (up to 2401 Mbps)
Antenna1 built-in omni antenna (5GHz) + 2 built-in omni antennas (2.4GHz/5GHz combined)
Junction Box Compatibility86mm standard and EU standard boxes
Depth Outside Wall24.8 mm (including decorative cover)
Depth Inside Wall13.2 mm
Form FactorIn-wall plate, flush-mount
Download Full Official Datasheet (PDF) →

Deployment Environments

The RG-RAP62-Wall-Lite is designed for hospitality-style deployments — one AP per room or suite, installed into the wall where a power/data outlet would normally sit, rather than a shared ceiling AP covering multiple rooms.

Typical Use Cases

Hotel guest rooms and suites
Serviced apartments
Student housing and dormitory rooms
Any space needing per-room Wi-Fi without a visible ceiling AP

Compatibility & Deployment Considerations

Requires an 86mm or EU-standard in-wall junction box already run with Ethernet cabling; confirm box compatibility during electrical/low-voltage planning before ordering at scale.

Frequently Asked Questions

What wall boxes does the RG-RAP62-Wall-Lite fit?
Standard 86mm junction boxes and EU-standard boxes.
Is one AP enough per hotel room?
It's designed as a per-room AP, so one unit typically covers a single guest room or suite.
How far does it protrude from the wall?
About 24.8mm outside the wall including the decorative cover, with 13.2mm sitting inside the wall cavity.
Does it support Wi-Fi 6?
Yes, dual-band 802.11ax with up to 2401 Mbps at 5GHz and 573 Mbps at 2.4GHz.

Availability & Quotation

The RG-RAP62-Wall-Lite is available through Spollex, subject to product availability. Submit a product requirement to receive current pricing, lead time, and shipping options for your destination.

For orders outside Spollex's core Authorized Distributor markets (UAE, Oman, Nepal), we support export and supply inquiries subject to destination requirements, commercial terms, and shipping feasibility — confirmed per inquiry, not guaranteed in advance.

Related Products

Available For These Markets

Request a Quotation for RG-RAP62-Wall-Lite

Tell us your quantity, project type, and delivery location — we'll follow up with pricing and availability.

Request a Ruijie Product Quotation